Product Center
IEPE是指一種自帶電量放大器或電壓放大器的加速度傳感器。IEPE是壓電集成電路的縮寫。因為由加速度傳感器產生的電量是很小的,因此傳感器產生的電信號很容易受到噪聲干擾,需要用靈敏的電子器件對其進行放大和信號調理。IEPE中集成了靈敏的電子器件使其盡量靠近傳感器以保證更好的抗噪聲性并更容易封裝。
美國Dytran的3176B是一款低成本的IEPE加速度傳感器/振動傳感器,壓電式應用原理,集成陶瓷應變片,頻率響應低,低至0.3Hz。
The Dytran 3176B is a rugged, cost effective IEPE piezoelectric accelerometer with a sensitivity of 100 mV/g and excellent low frequency response of 0.3 Hz.
Design of the model 3176B incorporates a ceramic shear sensing element, packaged in a stainless steel housing with a 2-pin MIL-C-5015 axial connector and 10-32 stud mounting capabilities. Model 3176B is hermetically sealed for reliable operation in high humidity and dirty environments and internally case isolated to avoid EMI/ground loop interference.
1. 100 mV/g sensitivity
2. 50g range
3. 0.3 to 10,000 Hz frequency range (±10%)
4. 2-pin axial connector
5. 10-32 tapped hole
6. 44 grams
7. Stainless steel
8. Hermetic
9. Case isolated
10. IEPE
應用
1. Industrial vibration monitoring
工業振動監控
2. Walkabout data collection
徒步旅行數據采集
3. General purpose vibration monitoring
一般用途振動監測
WEIGHT 44 GRAMS
SIZE, HEX x HEIGHT .69 x 1.66 IN
MOUNTING PROVISION (Model 3176B) TAPPED HOLE AT CENTER 10-32
(Model 3176B1) TAPPED HOLE AT CENTER 1/4-28
ELECTRICAL CONNECTOR, AXIAL 2-PIN MILITARY Mil-C-5015, HERMETIC
MATERIAL CASE/CONNECTOR 300 SERIES ST. STEEL
ELEMENT TYPE PIEZOCERAMIC, PLANAR SHEAR
PERFORMANCE
SENSITIVITY, ± 5% [1] 100 mV/G
RANGE FOR ± 5 VOLTS OUT ±50 G
FREQUENCY RESPONSE, ± 10% 0.3 to 10,000 Hz
MOUNTED RESONANT FREQUENCY >27 kHz
EQUIVALENT ELECTRICAL NOISE FLOOR, (RESOLUTION) .00002 G RMS
AMPLITUDE NON-LINEARITY (ZERO BASED BEST FIT ST.LINE METHOD) 2.0 % F.S., MAX.
TRANSVERSE SENSITIVITY, MAX. 5 PERCENT
STRAIN SENSITIVITY .0001 G's PER MICROSTRAIN @ 250/??
ENVIRONMENTAL
MAXIMUM VIBRATION 500 G's, RMS
MAXIMUM SHOCK 5000 G's, PEAK
TEMPERATURE RANGE -60 TO +250 oF
ENVIRONMENTAL SEAL GLASS TO METAL/WELDED, HERMETIC
ELECTRICAL
COMPLIANCE (SUPPLY) VOLTAGE RANGE [2] +20 to +30 VDC
EXCITATION CURRENT RANGE 2 to 20 mA
OUTPUT IMPEDANCE, NOM. 200 OHMS
OUTPUT BIAS VOLTAGE, ± 1. VOLTS 12 VDC
DISCHARGE TIME CONSTANT 0.9 to 2.0 SEC.
OUTPUT SIGNAL POLARITY FOR ACCELERATION TOWARD TOP POSITIVE GOING
POWER/SIGNAL GROUND to CASE ISOLATION, MIN. 10 GIGAOHMS
訂貨型號
3176B1 工業型
3176B2 工業型
3176B3 工業型
配件
1. Model 6200S mounting stud (10-32 to 10-32)
2. Mdel 4110C current source power unit, model 6187 magnetic mounting base, model 6190 magnetic mounting base, model 6194 protective boot
3. 電纜線:6038A, 6080A, 6082A, 6406A, 6407A, 6459A
相關型號
3184E
3185D
產品分類
PRODUCT CLASSIFICATION